AeroMarine Polymer Casting Resins is a fast setting, 1:1 mix low odor system.
It is ideal for casting decorative figurines, picture frames, toys, and
industrial parts. With a fast 5 minute demold time, it allows you to
make rapid prototypes or production runs.
AeroMarine Polymer Casting Resin is an off- white "Ivory" color and
can be easily painted. It sets to a hard polymer form and is
very tough and impact resistant. It somewhat resembles PVC pipe when
cured. Shrinkage is usually unmeasurable.
Specifications:
Shore Hardness: 75D
Tensile Strength: 2700psi
Flexural Strength: 2700psi
Mix Ratio: 1:1 by volume
Color: Off -white
Work Life: 90 seconds
Demold Time: 5 minutes
2 Gallon Kit- Makes two Gallons
AeroMarine Casting Resin,
1/2 Gallon Kit, Makes 1/2 gallon
Off-white color, no odor, extremely thin liquid
$28.00
AeroMarine Casting Resin,
2 Gallon Kit, Makes 2 gallons
Off-white color, no odor, extremely thin liquid
$72.00
AeroMarine Casting Resin,
10 gallon Kit, Makes 10 gallons
off white color, no odor, extremely thin liquid
$270.00
The
product below is a water clear, UV Resistant Polyurethane Casting Resin Similar to the product above, AeroMarine Crystal Clear Casting
Resin has a longer (20 minute) working time to allow air bubbles to rise
freely to the surface.
These colorants are highly concentrated. In small amounts they produce a translucent tint in our clear casting resin- in larger amounts they produce an opaque color. They are sold in 2 ounce bottles- One 2 ounce bottle will color 4 to 8 gallons of Casting Resin, depending on the strength of color required. We normally stock Black, Red, Blue, White, Orange, Green, Purple, Brown, and Yellow.
AeroMarine Colorant- Choice of Black, Red, Blue, White, Orange, Green, Purple, Brown, or Yellow
$12.00
Most orders are shipped within 24 hours- Weekend orders are shipped on
Monday.
