|
|
|
Silicone Mold Making RTV
(No vacuum equipment is required for any of our products)
|
 
Phone orders welcome!
1(877)342-8860
AeroMarine Products, Inc.
4128 Napier St.
San Diego, CA 92110
Ships Immediately
|
|
|
|
|
|
|
Six products are shown on this page:
"Mother Mold" (a rigid plastic shell to support thin-walled molds)
|
|
|
Description
|
Image
|
Price
|
|
AM 128 Silicone Rubber RTV-
Our most popular moldmaking product
High tear strength, ideal for production molds. The choice of professional mold makers.
|
|
|
AM 128 Pourable Silicone Rubber, 1/2 gallon kit - 4.4 lbs. $56 |
Ships Immediately
|
|
AM 128 Pourable Silicone Rubber, one gallon kit - 8.8 lbs. $89 |
Ships Immediately
|
|
AM 128 Pourable Silicone Rubber, 5 gallon kit - 44 lbs. $285
|
Ships Immediately
|
|
|
Simple 1:1 mix silicone mold making rubber, AM 125
This is a simple, 1:1 mix Silicone Mold Making RTV designed for beginers to mold making. It doesn't have quite as good properties as the 10:1 product shown above, but it is ideal for most mold making applications and cures in
less than two hours. Great for first time mold makers.
|
|
AM 125 1 quart kit - $31
Consists of one pint each part A and part B. |
Ships Immediately
|
|
AM 125 1/2 gallon kit - $59
Consists of one quart each part A and part B. |
Ships Immediately
|
|
AM 125 1 gallon kit - $96
Consists of 1/2 gallon each part A and part B.
|
Ships Immediately
|
|
|
Translucent Silicone Rubber, AM 128T
Clear enough that you can see through it for cutting to make two part molds
|
|
|
AM 128T Pourable, Quart kit - 2.2 lbs. $30 |
Ships Immediately
|
|
AM 128T Pourable, one gallon kit - 9.9 lbs. $96 |
Ships Immediately
|
|
AM 128T Pourable, 5 gallon kit - 49 lbs. $390
|
Ships Immediately
|
|
|
AM 128 Brushable
Brushable for making thin wall "glove" molds. Clings to a vertical surface.
We sell a product called "Mother Mold". It creates a hard plastic mold shell.
|
|
|
AM 128 Brushable, 1/2 gallon kit - 4.4 lbs. $56 |
Ships Immediately
|
|
AM 128 Brushable, one gallon kit - 8.8 lbs. $89 |
Ships Immediately
|
|
AM 128 Brushable, 5 gallon kit - 44 lbs. $285 |
Ships Immediately
|
|
|
Digital Scale
|
Image
|
Price
|
|
Mold Release to release silicone from silicone. This product is essentially "Vaseline" in a 12 ounce spray can.
|
 |
$9 each
Ships Immediately
|
|
Digital Scale
|
Image
|
Price
|
|
Digital Scale - This scale is ideal for weighing silicone rubber and other chemicals. It is calibrated in grams or pounds/ounces. We use them here for measuring products and for weighing our boxes for shipping. It measures from as low as 2 grams to as high as 55 pounds.
|
|
$25 each
Ships Immediately
|
|
AeroMarine Silicone Rubber Putty
|
Image
|
Price
|
|
Fast setting, one to one mix,
silicone RTV rubber putty
Used to make rapid molds
Safe to use on skin.
|
|
|
1 pound kit - consists of 8 ounces each
of Part A and Part B $25 |
Ships Immediately
|
|
8 pound kit - consists of 4 pounds each of Part
A and Part B $175 |
Ships Immediately
|
|
100 pound kit - consists of 50 pounds each Part
A and Part B $1200 |
Ships in three days
|
|
|
How to make a mold with silicone RTV rubber putty
|
These photos demonstrate a method of making a quick mold of a shell found on the beach.
This mold cost less than $2 to make and it was completed in about 5
minutes.
The first two photos
show measuring and mixing equal amounts of moldmaking rubber.
The third
photo shows "smooshing" the silicone onto the original shell. In the fourth photo the mixed casing resin is being poured into the mold.
In the fifth photo the finished casting is being demolded. It is made
of AeroMarine Casting Resin, and cost about $.05 on materials. It
could also have been made of soap, wax, chocolate, candy, or even a low melt
metal. |
 |
 |
(1) Measuring the silicone rubber putty before mixing.
|
(2) Kneading the silicone rubber putty. |
|
|
|
(4) Pouring the mixed casting
resin into the mold.
|
|
(3) 'Smooshing' the putty over the shell.
|
(5) Demolding the finished part. In this case it is AeroMarine casting
resin, but it could easily have soap, wax, chocolate, candy,or even low
melt metals. |
We also sell several accessory products for our silicones: |
|
|
|
|
© 2010 AeroMarine Products │ Policies | Samples |
|
|
|